Orthopedics: Restoring chewing efficiency

Course 1: Ceramic layering: protocols of the world's leading schools

You will learn how to layer ceramics according to the protocols of the world's leading schools in a convenient video demonstration format: watch and repeat after the master!

Lecturers will not only tell, but also demonstrate in practice:

• The use of additive layering techniquethe minimal thin layer technique with multilayer zirconia
• Internal stain technique.

During the training, you will learn:

• The technique of using contrasting ceramic mixesmethods of forming the morphology and surface texturefinishing with handpolishing.

Duration: 6 h 31 min · Presented by: Chien-Ming Kang, Taylan Sari, Oliver Brix

Course 2: Implant-Retained Dentures: Innovative Approach to Full-Arch Prosthetics

During the course, you will learn about:

• Comprehensive assessment and treatment planning for edentulous patients
• Surgical protocols for implant placement for implant-retained dentures
• Prosthetic design considerations and material selection for implant-retained dentures
• Techniques for achieving optimal fit, function, and esthetics with implant-retained dentures.

Enhance your skills and elevate your practice with the latest techniques in implant-retained denture treatment!

Duration: 11 h 37 min · Presented by: M.K. (Bobby) Baig, Conrad Rensburg, Cristian Coraini, Regina Fragoso, John Hodges

Course 3: Online school of orthopedic dentistry

• Module 1: Bonding of ceramic veneers. Step-by-step protocols
• Try-in utilizing try-in pastes
• Working with tight proximal contacts
• Bonding protocols for ceramic veneer
• Rubberdam isolation
• Try-in with rubberdam. What to pay attention to
• Tooth structures treatment fro proper bonding and avoiding sensitivity
• Veneer bonding using composite cement
• Finishing and polishing
• Module 2: Adhesive systems. Review and clinical APPLICATION
• Adhesives for total etching.

Self-etching systems.

Universal adhesives.

• Clinical protocols
• Total etching. Step by step binding protocol.

Selective etching. Step by step binding protocol.

• Module 3: Bonding: Zirconia crowns and Ceramic over-lays + Isolation
• Bonding to zirconia and glass ceramic.

Material selection: resin cements, bonding systems, ceramic and zirconia primers.

Treatment of tooth surface.

What to do if there is composite filling or IDS.

Zirconia crown cementation: step-by-step.

Bonding of ceramic overlay: step-by-step.

Tips with rubberdam isolation for bonding procedures.

• Module 4: Ceramic in-lays, over-lays and veneer lays. Preparation designs
• In-lay preparation. Indications and full process
• Cusp reduction. When and how.

• Over-lay preparation. Indications and full process
• Cavity design optimizing and immediate dentin sealing.

• Veneer-onlay preparation. Indications and full process
• Protocols of preparation and instruments to use.

• Module 5: Veneers and class 3 caries defects. Clinical aspects of tooth preparation
• Preparation nuances related to proximal zones, opening contacts
• Tactics selection: to treat caries before preparation or to treat during process of preparation
• Rubberdam placement
• Initial stage of preparation and depth control utilizing silicon index
• Immediate dentin sealing and filling of undercuts. Bonding protocol
• Final step of preparation with rubberdam. Tips and tricks
• Module 6: Complete guide in veneer preps. All types
• Window prep. Indications and full process
• Type 1. When we keep proximal contact
• Type 2. When we brake proximal contact
• Type 3. Prep through proximal zone
• Type 4. Incisal overlap. Old school or good option?

How to prep if there are composite fillings.

Diastema: to prep or not to prep.

Detailed protocols of preparation and instruments to use.

• Module 7: Direct posterior restorations
• Isolation and preparation
• Design of future restoration-tooth interface
• Bonding protocols: total etching and self etching
• Modeling of occlusal anatomy controlling possible occlusal adjustments
• Micro anatomy and using tints
• Stamp technique (""copy-paste"")
• Module 8: Impression and retraction techniques
• Preparing teeth for impression taking. Chlorhexidine
• Retraction. Single cord and double cord techniques. Retraction pastes
• Impression tray selection
• One step impression
• Two step impression
• Hybrid technique using plastic frame
• Results evaluation. Mistakes analysis
• Module 9: Preparation for full crowns: Posteriors
• Silicone index for preparation control
• Preparation for ceramic crowns(e.max)
• Preparation for zirconia crowns
• Full protocol of reparation performing finish lines for posterior teeth
• Ergonomics and tips working with mirror.

• Module 10: RUBBERDA
• Mology: basics, tips and tricks with isolation
• Clamp modification
• Basic and advanced equipment for isolation
• Split-dam overview for different tasks
• Classic protocols of isolation in operative dentistry
• How to prep teeth under the dam
• Module 11: Veneers and caries defects class 4 and 5
• Getting silicone index and initial stage of preparation
• Complete opening of proximal zones in case of class 4 caries defect and determination of finish line placement in case of class 5
• Rubberdam placement
• Immediate dentin sealing and filling of undercuts. Bonding protocol
• Working with palatal silicone index in case when class 4 defect has bigger palatal involvement than from buccal side
• Final step of preparation with rubberdam. Tips and tricks
• Module 12: Veneers and discoloration
• Ceramic systems review
• Communication with dental lab, discussing thickness of restoration to change the color
• Selection of type of ceramic considering color change
• Evaluation and planning of preparation volume
• Silicone keys to control reduction process
• Mockup, Initial preparation
• Features with proximal preparation. Soft tissues retraction
• Cervical finish line: where to localize and perform, Final preparation, Result evaluation
• Special add-on: Immediate dentin sealing. Clinical steps and protocols.

• Module 13: Veneers on premolars and molars
• Step-by-step protocols of veneer preparations for posterior teeth
• Silicon indexes for posterior teeth
• Initial preparation, reduction control
• Veneer preparation - type 1 ""
• Window""
• Veneer preparation - tupe 2 ""
• Butt joint""
• Veneer preparation with occlusal overlaying - type 3 ""
• Veneer-overlay""
• Final preparation

Duration: 28 h · Presented by: ours 7 minutesBy Maxim Belograd

Course 4: Precision in Dental Restorations: From Veneers to Occlusion - Dental Online Training Mega Course

Webinars are dedicated to enhancing your clinical skills with a strong emphasis on practical techniques. We prioritize your education and ensure that each session delivers valuable, unbiased content that you can trust and apply in your practice.

Duration: 16 h 55 min · Presented by: Dennis Hartlieb

Course 5: Overlay, Onlay and Advanced Adhesion

This course will train students in the science & fundamentals of Biomimetics & Advanced Adhesive Restorative Dentistry with the focus on indirects. The main goal of the institute is for students to receive the necessary training to implement Biomimetic & Advanced Adhesive techniques into their practice immediately.

Techniques Learned in this Course:

Overlay & Onlay Design:

• Students will learn to diagnose & treatment plan for Onlays & Overlays as well as the advantages of non-retentive partial coverage ceramics in regards to fracture resistance, bondability, and pulp health following restorative treatment

Tooth Preparation Training:

• Students will learn preparation protocols including bur selection, speeds and step by step workflow. Multiple in-depth typodont & live case demos will simulate a hands on workshop but with the ability to pause, rewind, and watch again

Immediate Dentin Sealing:

• Students will learn how to address the “fundamental problem in adhesive dentistry” & how to get durable & strong dentin bonds by utilizing Immediate Dentin Sealing & Resin Coating

Advanced Adhesive Delivery:

• Students will learn how to temporize non-retentive preparation designs as well as how to adhesively lute partial coverage ceramics with advanced procedures such as Warm Composite. Students will have typodont & live case demos

Cracked Tooth Diagnosis & Treatment Strategies:

• Students will learn why teeth crack and how to treat them with adhesive partial coverage ceramics utilizing the Compression Dome Theory

Duration: 24 h 9 min · Presented by: Graeme Milicich, Steve Schiffenhaus

Course 6: Esthetic Rehabilitation

This video course describes Dr. Fradeani’s systematic approach to prosthetic rehabilitation.

The aim of the course is to help specialists feel confident and equipped to perform any treatment involving the use of bridges, crowns, veneers and onlays on natural teeth and implants, from single restoration to full-arch prosthetic rehabilitation.

Thanks to this course you will learn how to:

• Increased knowledge of the systematic and proven approach promoted by Dr. Mauro Fradeani, experimented for 30 years by Studio Fradeani, one of the most renowned esthetic and prosthetic rehabilitation dental office

Ability to combine esthetic, biological and functional requirements on natural teeth and implants Ability to identify the different steps necessary to define the treatment plan and assess facial, dentolabial, phonetic, dental and gingival factors.

This video course describes in detail the minimally invasive prosthetic approaches performed by Dr. Fradeani, using conservative tooth preparations capable of maintaining a sufficient amount of enamel, allowing the use of effective adhesive cementation techniques, and guaranteeing unexpected comfort to the patient throughout treatment.

Duration: 8 h 13 min · Presented by: Mauro Fradeani

Course 7: Vertical Preparation Protocols: The Complete Guide in 24 Lessons from Tomorrow Tooth

• Big course on vertical preparation for prosthodontists and dental technicians.24 online lessons are:16 hours of intensive training with detailed protocols of all stages of working with VertiPrep
• Lecturers who are proficient in the vertical preparation technique from A to Z - Pasquale Venuti and Marco Maiolino
• Ideal training for the ""prosthodontist - dental technician"" team.

Lecturers will consider in detail:

• Features of vertical preparation (biomechanics, indications and contraindications for use, used burs and handpiecesdetailed protocol of impressions: analog and digital methods
• Protocol for manufacturing and cementing temporary restorations
• Protocol for manufacturing and cementing final restorations.

Duration: 15 h 29 min · Presented by: Marco Maiolino, Pasquale Venuti

Course 8: Esthetic rehabilitation with ceramic veneers

Full restoration case: from mock-up to cementation.

This Masterclass shows all the preparation phases that do not require the use of anesthesia and provides precise indications to prevent veneer detachment or fracture.

Duration: 16 h 34 min · Presented by: Mauro Fradeani, Leonardo Bacherini

Course 9: Veneers, inlay, onlay, crowns full protocols

During the course you will learn:

• Tooth preparation techniques for veneers, onlay, inlay, overlay, endocrown, full crown
• Materials used to fabricate digital prosthetic restorations
• Adhesive tooth preparation
• Rules for taking the perfect impression
• Possibilities of prosthetic restorations in severe clinical situations
• Cementing principles and protocols.

Skills you will learn in the course:

Treatment methods:

• Aesthetic rehabilitation
• Fixed prosthetics

Pathologies:

• Destruction of the crown part of the tooth

General questions:

• Digital prosthetics

Restorations:

• Half-crowns
• Ceramic veneers

Duration: 6 h · Presented by: ours 43 minBy Paolo Generali

Course 10: Overdentures supported by implants

The best resource to getting started with Overdentures.

HERE'S THE PROBLEM:

• Surgeries and restorative process looks super complicated
• You feel like you need to take a ton of CE courses just to get started
• There is no one-stop shop to learning how to take on these cases
• Nobody explains it in a straightforward way…

HERE'S YOUR SECRET WEAPON:

• Step by Step Explanations of Each Procedure
• Easy to Refer Back to Walkthroughs
• Access to Content Forever

INSIDE NINJA OVERDENTURES:

• Step-by-Step Surgical Technique Videos
• Step-by-Step Restorative
• Benchtop Demos
• Treatment Planning Tips
• Learn the Tools of the Trade

Duration: 5 h 21 min · Presented by: Ivan Chicchon